Slide Board - Stubby

The Slide Board - Stubby can be used to slide to and from a wheelchair, or to a bed or chair. It is used by more co-ordinated people who can balance and control the move with their arms. This product is translucent.

Key Features

• Made from a strong, self-lubricating Poly material that bends but does not break.
• Outer surface may mark easily, but the advantages of using this material outweigh the disadvantages.
• Transferring Tip: If the patient crosses their legs, it is easier to place the Slide Board - Stubby under the raised leg.

Additional Information

Consult your Physiotherapist, Occupational Therapist or Back Care Specialist when using Manual Handling Products.

Non-Slip Tape: Some manufacturers have non-slip tape on the back of their Slide Boards (also known as Transfer Boards). The non-slip tape is not really necessary, as the Slide Boards do not move a lot when they are correctly positioned. Non-slip tape can make it harder to position the Slide Board under a patient, and to remove the board after the transfer. If the Slide Board is used upside down, the non-slip tape will stop the person from moving. By not having any non-slip tape, the Pelican Slide Boards can be used either way up. Also, the non-slip tape can make it difficult to keep clean, particularly if the patient is incontinent or there may be some other cross-infection reason. Remember if the person is sitting on a chair, or on a bed or operating table and the Slide Board is put under them, the Slide Board can be contaminated on both sides i.e. the top and bottom of the Board. This can be from the patient's clothing, and from where they are sitting on the chair, bed, etc. as the chair will also be contaminated. If the non-slip tape is on the underside of the board, it means the board cannot be easily wiped clean. If a customer particularly wants non-slip tape, this can be purchased from most hardware shops and the customer can easily put non-slip tape on the Boards.

Slide the Patient – Not the Board: Remember: Slide the patient across the board. Do not slide the board, with the patient on top, across the bed. Hand Slots are designed when carrying the board, not for when transferring patients.

Specifications

Item #: 588
Item Weight: 1.35kg / 3lbs
Size:
52cm x 27cm x 1cm
20.5" x 10.5" x 0.4"

Cleaning

Spray & wipe clean with disinfectant. If more slip is required, use silicon spray Helmar H 4000.

Important

Some manufacturers have non-slip tape on the back of their Slide Boards (also known as Transfer Boards). The non-slip tape is not really necessary, as the Slide Boards do not move a lot when they are correctly positioned. Non-slip tape can make it harder to position the Slide Board under a patient, and to remove the board after the transfer. If the Slide Board is used upside down, the non-slip tape will stop the person from moving. By not having any non-slip tape the Pelican Slide Boards, they can be used either way up. Also, the non-slip tape can make it difficult to keep clean, particularly if the patient is incontinent or there may be some other cross infection reason. Remember if the person is sitting on a chair, or on a bed or operating table and the Slide Board is put under them, the Slide Board can be contaminated on both sides i.e. the top and bottom of the Board. This can be from the patient's clothing, and from where they are sitting on the chair, bed, etc. as the chair will also be contaminated. If the non-slip tape is on the underside of the board, it means the board cannot be easily wiped clean. If a customer particularly wants non-slip tape, this can be purchased from most hardware shops and the customer can easily put non-slip tape on the Boards.

Unit of Measure

Each