Chooze is for everyone – NDIS participants, older Australians, and anyone looking for helpful products.

Mobility & Transfer AssistanceAccessoriesMobility CoversWheelchair Car Carrier Cover

Wheelchair Car Carrier Cover

NDIS Support Item Reference No. 05_121218811_0109_1_2

The NDIS Support Item Reference Number provided is a guide only. Please note that each purchase must align with your individual plan goals and needs, and eligibility may vary based on your disability type and NDIS plan. Final approval for claims is determined by the NDIS.

$329.00
Quantity
Loading reviews...

Description

This product is designed to protect a wheelchair when it is on a wheelchair car carrier. It is perfect for short or long trips, holidays, or as a dust cover if your wheelchair is in storage. It has a heavy-duty, UV protected canvas material on the front, back and top, while the sides are made from a heavy-duty nylon material, allowing the material to be gathered in when the straps are fastened. Although the canvas is waterproof, this is a sewn product and is open at the bottom, so it is not a 100% sealed product.

Key Features

  • Heavy-duty, waterproof canvas material
  • Reflective tape to warn approaching vehicles, especially when parked at night
  • Auxiliary number plate window, which is necessary as the wheelchair is not allowed to conceal the car's number plate
  • Adjustable buckles to adjust the webbing straps to stop the material flapping
  • Heavy-duty webbing with excess length securing loops to help stop them flapping around
  • Top handles for fitting and removing
  • Storage bag

Additional Information

This cover also works as an airline travel bag for wheelchairs. The wheels of the wheelchair can still rotate when the bag is on.

Specifications

Item #: 9300
Maximum size when in use: 91cm wide x 85cm high x 30cm deep / 36" wide x 33" high x 12" deep
Packed size: 50cm x 40cm x 20cm / 20" x 16" x 8"
Weight: 2.5kg / 5.5lbs

Cleaning

Wipe clean. Ensure the product is dry before using or storing.

Important

Due to the nature of how this product is used, we cannot offer our standard warranty, although we do guarantee against materials and workmanship.

Unit of Measure

Each

To Fit

  1. Undo all four buckles and place the cover over the wheelchair
  2. Fasten the two vertical buckles and tighten the straps
  3. Fasten the two horizontal buckles and tighten the straps
  4. Thread any excess straps through the securing loops
  5. Ensure the straps do not obscure the number plate.

Helpful Information for Auxiliary Number Plates

State Information
NT Contact local authorities for details.
ACT Ph 13 22 81
NSW Ph 02 9433 1600
QLD Contact local authorities for details.
SA Contact local authorities for details.
WA Contact local authorities for details.
TAS Form MR171 at local transport authority.

Product Options

View our entire range of Wheelchair Accessories.